630d www.vishay.com vishay sprague revision: 24-apr-13 1 document number: 42044 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 aluminum capacitors + 125 c, miniature, axial lead features ? extended temperature range ? economical ? high reliability design ? low dcl option ? for timing circuit applications ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 quick reference data description value nominal case size ? ? d x l in mm 0.248" x 0.689" [6.3 x 17.5] to 0.492" x 1.752" [12.5 x 44.5] operating temperature - 55 c to + 125 c rated capacitance range, c r 6.8 f to 3900 f tolerance on c r 20 % rated voltage range, u r 3 wv dc to 63 wv dc termination axial leaded life validation test at 125 c ? 500 h for case size bb to cb ? 1000 h for case size cc to df ? 2000 h for case size dh to fk ? cap ? 20 % from initial measurement. ? esr ? 1.5 x initial specified limit. ? dcl ? initial specified limit. shelf life ? 500 h at 85 c ? cap ? 20 % from initial measurement. ? esr ? 1.5 x initial specified limit. ? dcl ? 3 x the initial specified limit. dc leakage current i = 0.004 cv + 3 i in a, c in f, v in volts ripple current multipliers temperature ambient temperature multipliers + 105 c 0.5 + 85 c 1.0 + 65 c 2.0 + 55 c or less 2.5 frequency (hz) wv dc 50 to 60 100 to 120 300 to 400 > 1000 3 to 63 0.90 1.00 1.10 1.35 dimensions in inches [millimeters] case code nominal style 2 style 5 d l d (max.) l (max.) d (max.) l (max.) bb 0.248 [6.3] 0.689 [17.5] 0.276 [7.0] 0.756 [19.2] 0.276 [7.0] 0.815 [20.7] cb 0.315 [8.0] 0.689 [17.5] 0.339 [8.6] 0.756 [19.2] 0.339 [8.6] 0.815 [20.7] cc 0.315 [8.0] 0.807 [20.5] 0.339 [8.6] 0.878 [22.3] 0.339 [8.6] 0.937 [23.8] dc 0.374 [9.5] 0.807 [20.5] 0.402 [10.2] 0.878 [22.3] 0.402 [10.2] 0.937 [23.8] dd 0.374 [9.5] 0.945 [24.0] 0.402 [10.2] 1.004 [25.5] 0.402 [10.2] 1.063 [27.0] df 0.374 [9.5] 1.260 [32.0] 0.402 [10.2] 1.319 [33.5] 0.402 [10.2] 1.378 [35.0] dh 0.374 [9.5] 1.496 [38.0] 0.402 [10.2] 1.567 [39.8] 0.402 [10.2] 1.626 [41.3] ef 0.433 [11.0] 1.260 [32.0] 0.465 [11.8] 1.319 [33.5] 0.465 [11.8] 1.378 [35.0] eh 0.433 [11.0] 1.496 [38.0] 0.465 [11.8] 1.567 [39.8] 0.465 [11.8] 1.63 [41.3] fh 0.492 [12.5] 1.496 [38.0] 0.516 [13.1] 1.567 [39.8] 0.516 [13.1] 1.63 [41.3] fk 0.492 [12.5] 1.752 [44.5] 0.516 [13.1] 1.83 [46.5] 0.516 [13.1] 1.89 [48.0]
630d www.vishay.com vishay sprague revision: 24-apr-13 2 document number: 42044 for technical questions, contact: aluminumcaps4@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? for lead (pb)-free/rohs compliant prod ucts add suffix e 3 to part number. ? example: 630d157m030df2ae3 dimensions and available forms part number information 630d 826 m 003 bb 2 a type capacitance capacitance tolerance dc voltage rating case code case style packaging identifies the series name. expressed in pf. the first two digits are significant figures. the third is the number of zeros. m = - 20 %/+ 20 % a = - 10 %/+ 10 % expressed in volts. the letter r signifies a decimal point (i.e. 6r3 = 6.3 v). see table dimensions. 2 = polyester insulating sleeve (std.) 5 = polyester insulating sleeve with resin end seal (required for exposure to halogenated cleaning solvents) a = bulk pack (std.) t = tape and reel (not available in g and l diameters) l ? d case style 2 31.75 lead diameter no. 20 awg (0.032" [0.813 mm] dia.) 31.75 case style 5 l ? d 31.75 31.75 epoxy end seal
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
